Bulling and shining a military boot to parade standard is a time-honoured tradition, and using a Selvyt cloth can help you achieve the perfect shine. Here’s a step-by-step guide on how to bull and shine a military boot using a Selvyt cloth:

1. Clean the boot thoroughly – Before you begin the polishing process, you need to ensure that the boots are clean and free from dirt and dust. Use a damp cloth or brush to remove any loose dirt or debris, and allow the boots to dry completely before moving on to the next step.
2. Apply the polish: Choose a high-quality military boot polish in the appropriate colour for your boots. Using a clean cloth, apply a thin layer of polish to the boots, covering the entire surface evenly. Let the polish dry completely before moving on to the next step.
3. Bull the boots: To bull the boots, you’ll need a clean, dry Selvyt cloth. Fold the cloth in half, and wrap it tightly around your index and middle fingers, leaving a flat surface on the outside. Then, apply a small amount of water to the flat surface of the cloth.
4. Apply pressure and buff the boots: Using the cloth-wrapped fingers, apply firm pressure to the boots in a circular motion. This will create heat and friction, which will melt the polish and create a high shine. Buff the boots vigorously until you achieve the desired shine, using a clean section of the Selvyt cloth as necessary.
5. Repeat the process: To achieve a high shine, you may need to repeat the process of applying polish and bulling the boots several times. Each time you apply polish, make sure to let it dry completely before bulling the boots again.
6. Finish with a topcoat: Once you have achieved the desired shine, you can finish the boots with a topcoat. Apply a thin layer of clear polish over the entire surface of the boots, and buff them again with the Selvyt cloth to create a final high shine.

By following these steps and using a Selvyt cloth, you can achieve a professional-looking shine on your military boots that meets parade standards. Remember to take your time, and be patient and persistent in the process. With a little effort and the right tools, you can achieve a perfect shine on your military boots.